Short answer. When a customer's questionnaire asks a small supplier about Scope 3, it usually wants one of six things: whether you measure it, your total by category, the share of your emissions attributable to that customer, a product footprint, a reduction target, or how you engage your own suppliers. The most common request, the customer's share, is built from your Scope 1 and 2, not your Scope 3. Answer that one properly and state honestly what you do not yet measure.
Checked on 18 November 2026. Sources and unresolved points are in the method note at the end.
The Scope 3 section is where most small suppliers stop filling in a questionnaire. The questions look like they demand a full value chain inventory. Read closely, most of them ask for something smaller and more specific.
Key takeaways
- Six question types cover most requests. Each needs a different answer.
- Your Scope 1 and 2 is their Scope 3. That is the core request.
- Allocation is simple arithmetic. Your emissions times their revenue share.
- Category breakdowns sit outside the cap. Optional for most SMEs from 2027.
- "Not measured yet" is a valid answer. A date beats a guess.
Why does a customer ask you about Scope 3 at all?
Because you are part of theirs. A large company's Scope 3 includes everything it buys, and the emissions of its suppliers' own operations sit inside its category 1, purchased goods and services.
Most customers cannot measure that category well without asking suppliers. Spend-based estimates use industry averages, and frameworks such as CDP and the Science Based Targets initiative push companies toward supplier-specific data instead.
That is why the request arrives in your inbox. If it is your first, our guide to the customer questionnaire covers the triage before you reach the emissions section.
What are the six questions really asking?
The wording varies between platforms and customers, but the intent falls into six types. The table shows what each wants and the minimum honest answer a small supplier can give.
| Question as worded | What it actually wants | Minimum honest answer for a small supplier |
|---|---|---|
| "Do you measure your Scope 3 emissions?" | Your maturity level | No, or partially, with the categories covered and a date for the next step |
| "Report your Scope 3 emissions by category" | Your full value chain inventory | Categories measured, method used, and the rest marked not yet measured |
| "Allocate your emissions to us" or "emissions attributable to our purchases" | The customer's share of your Scope 1 and 2 | Scope 1 and 2 total multiplied by that customer's share of your revenue |
| "Provide the carbon footprint of the products you supply" | A product carbon footprint per unit | Not available, or an allocated estimate per unit with the method stated |
| "Do you have a Scope 3 reduction target?" | Whether you will keep reducing | Any target you have, with a baseline year; otherwise a Scope 1 and 2 target |
| "Do you engage your suppliers on emissions?" | Whether the request is cascading down | Yes or no, and what you ask your top suppliers for |
Notice which row depends on Scope 3 data you probably lack. Only the second one truly does, and it is the one customers value least from a small supplier.
How do you calculate the customer's share?
Take your Scope 1 and 2 total and multiply it by the share of your revenue that comes from that customer. Revenue allocation is the most common method for suppliers without product-level data, and it is easy to explain.
| Step | Figure | Result |
|---|---|---|
| Scope 1 and 2, market-based, last financial year | 120 tCO2e | 120 tCO2e |
| Total revenue | €4,000,000 | Intensity: 30 tCO2e per €1m |
| Revenue from the requesting customer | €600,000 | Share: 15 percent |
| Emissions allocated to the customer | 120 x 15% | 18 tCO2e |
State the method next to the number: "Scope 1 and 2, market-based, allocated by revenue share." If a physical measure such as tonnes delivered or machine hours fits your business better, use that and say so.
The allocation is only as good as the total underneath it. If you do not have a Scope 1 and 2 figure yet, our guide to calculating Scope 1 and 2 in a spreadsheet gets you there with a year of invoices.
Do you have to report your own Scope 3 at all?
For most small suppliers, not as a legal matter. From financial years beginning 1 January 2027, the value chain cap in Delegated Regulation (EU) 2026/1560 limits what companies reporting under the CSRD may require from suppliers with up to 1,000 employees for that reporting.
Summaries of the cap place total energy, Scope 1 and location-based Scope 2 inside it, and full Scope 3 category breakdowns outside it. Your customer can still ask for Scope 3 for commercial reasons, but you can treat it as optional and say so politely.
The cap applies once the customer's member state has transposed the amending directive, due by 19 March 2027.
When is it worth measuring your Scope 3?
When several customers ask for it, or when one large customer makes it a condition of the contract. At that point, start with the two or three categories that matter for your business, usually purchased goods and services, freight and business travel.
A spend-based estimate is acceptable as a first step if you label it clearly. Customers would rather see "Category 1, spend-based, 2025, about 400 tCO2e" than a blank or an invented figure.
Keep those figures with the rest of your sustainability data, organised as in the VSME basic module. Do not let the Scope 3 section block the rest of the questionnaire: answer the allocation question, mark categories honestly, and submit.
For all 15 categories, see our explainer on Scope 1, 2 and 3.
Method note
The question types are a synthesis of wording common in supplier questionnaires, rating platforms and customer surveys reviewed by Green Insider, and are paraphrased rather than quoted from any single platform. Revenue-based allocation is one of several methods; physical allocation can be more accurate where output is uniform.
The description of the value chain cap follows Delegated Regulation (EU) 2026/1560 and published summaries of its Annex II; the exact datapoints should be checked against the regulation text. Its application depends on national transposition of Directive (EU) 2026/470.
All sources read on 18 November 2026. This article is not legal or financial advice.
What to do this week
- Sort the Scope 3 questions in your current questionnaire into the six types.
- Calculate or confirm your Scope 1 and 2 total for the last financial year.
- Work out the requesting customer's share of your revenue and the allocated figure.
- Write one sentence on your method and reuse it in every questionnaire.
- List which Scope 3 categories you would measure first if asked again.
Frequently asked questions
Why does my customer ask for Scope 3 when I only have Scope 1 and 2?
Your Scope 1 and 2 forms part of their Scope 3. Many Scope 3 questions are really asking for your operational emissions, allocated to them.
How do I allocate my emissions to one customer?
Multiply your Scope 1 and 2 total by that customer's share of your revenue, or by a physical measure such as tonnes delivered, and state the method.
Can I leave the Scope 3 questions blank?
Better to answer "not yet measured" with a planned date. A blank often scores as no answer at all.
Is a spend-based Scope 3 estimate acceptable?
As a first step, usually yes, if it is clearly labelled with the method and year.
Do I have to give Scope 3 to a customer reporting under the CSRD?
From financial years beginning 1 January 2027, full Scope 3 category breakdowns sit outside the value chain cap for suppliers with up to 1,000 employees, so they are optional for that purpose.
Green Insider is independent. No vendor, rating platform or consultancy paid for a mention in this article, and none was given advance sight of it.




