CLIMATE. CAPITAL. CHANGE.Intelligence for the green economy.
Green Insider

Your first CBAM bill is not 2.5 percent of your emissions

CBAM certificate sales open 1 February 2027. Why the 2.5 percent figure misleads, how the bill is really calculated, and what it costs per tonne of steel.

Your 2026 CBAM bill will be 2.5 percent of the real number

Short answer. CBAM certificate sales open on 1 February 2027 for goods imported during 2026, and the first annual declaration is due on 30 September 2027. The 2.5 percent often quoted for 2026 is not the share of your emissions you pay for. It applies only up to the product benchmark, and every tonne above it is charged in full from the first year.

Checked on 16 November 2026. Sources and unresolved points are in the method note at the end.

Correction, 16 November 2026. An earlier version of this article said the 2026 CBAM cost would be 2.5 percent of the full carbon cost of embedded emissions, and its worked example understated the bill by a large margin. That was wrong. The calculation below has been rewritten, and the headline changed accordingly.

Most CBAM coverage this year has been about declarant status. The question arriving now is how much the carbon actually costs, and the most widely repeated number about it is the one most likely to mislead a budget.

Key takeaways

  • Certificate sales open 1 February 2027. They cover goods imported during 2026.
  • The first declaration is due 30 September 2027. It covers calendar year 2026.
  • 2.5 percent applies only up to the benchmark. Emissions above it pay in full.
  • The Q2 2026 benchmark price was 75.28 euro. Per tonne of CO2.
  • Distance from the benchmark drives the bill. Default values usually sit far above it.

What happens between now and September 2027?

The definitive regime began on 1 January 2026. From that date, importing covered goods above the annual threshold of 50 tonnes required authorised CBAM declarant status, and the financial side follows with a delay.

Date What happens
1 January 2026 Definitive regime begins; declarant status required above the 50-tonne threshold
1 February 2027 Certificate sales open for goods imported during 2026
30 September 2027 First annual CBAM declaration and certificate surrender, covering 2026
2026 to 2028 Mark-up on default values rises from 10 to 20 to 30 percent
2026 to 2034 Free allocation deducted from the obligation falls from 97.5 percent to zero
CBAM timeline for an importer of covered goods. Green Insider, November 2026.

Covered goods are cement, electricity, fertilisers, iron and steel, aluminium and hydrogen. If you import none of them, nothing here applies to you yet.


How is the bill actually calculated?

The number of certificates per tonne of product is its declared embedded emissions minus a free allocation adjustment, and never less than zero. That adjustment is the CBAM factor multiplied by the benchmark for the product, and the factor is 0.975 for 2026.

So the 2.5 percent describes the part of the benchmark that is no longer covered by free allocation. A product whose emissions exactly equal its benchmark pays for 2.5 percent of them in 2026, but a product above the benchmark pays for everything above it at the full price. Declared emissions on CBAM default values almost always sit above it.

Certificates for 2026 imports are priced on quarterly averages of EU allowance prices. The Commission published the CBAM benchmark price for the second quarter of 2026 at 75.28 euro per tonne of CO2.


What does that mean per tonne?

The table uses blast furnace steel slab, whose default benchmark is 1.364 tonnes of CO2 per tonne, so 2026 free allocation deducts 1.330. The only thing that changes from row to row is how far the declared emissions sit above that benchmark.

Declared emissions, tCO2e per tonne Certificates per tonne Cost per tonne Cost for 100 tonnes
1.364 (equal to the benchmark) 0.034 3 euro 257 euro
1.6 0.270 20 euro 2,033 euro
2.0 0.670 50 euro 5,045 euro
2.5 1.170 88 euro 8,809 euro
3.486 (Chinese slab default with 10% mark-up) 2.156 162 euro 16,231 euro
2026 CBAM cost for steel slab at the default benchmark of 1.364 and the Q2 2026 price of 75.28 euro. Illustrative; benchmarks differ by product and route. Green Insider, November 2026.

The first row is the 2.5 percent case, and almost nobody will be in it. Move to the bottom row, which is what an importer of Chinese slab declares without verified supplier data, and the same 100 tonnes cost more than sixty times as much.

Scale matters accordingly. At the default value, 500 tonnes of that slab cost about 81,000 euro for 2026 imports and 2,000 tonnes about 325,000 euro, before any deduction for a carbon price paid in the country of origin.


Why the first year still sets the next eight

The bill grows every year even if prices stay flat. The mark-up on default values rises to 30 percent from 2028 and the free allocation deduction shrinks to 90 percent of the benchmark in the same year.

The lever you control is the distance between your declared emissions and the benchmark. Verified data from the producing installation replaces the default and its mark-up, and getting it takes months, because the first verification needs an accredited verifier to visit the site.

Responsibility for the declaration stays with the importer or declarant, even when a customs agent or consultant prepares it. The same discipline that applies to any supplier data request applies here: ask early, in writing, with a deadline and a reason.

The certificates are surrendered with the first CBAM declaration, due on 30 September 2027.


Method note

Dates and obligations follow Regulation (EU) 2023/956 as amended, with the certificate formula and CBAM factors taken from that regulation and Article 10a(1a) of Directive 2003/87/EC. The default benchmark of 1.364 for blast furnace slab is from Implementing Regulation (EU) 2025/2620, and the Chinese slab default of 3.169 before mark-up is from Implementing Regulation (EU) 2025/2621 as corrected in July 2026.

The price of 75.28 euro is the Commission's CBAM benchmark price for the second quarter of 2026. The table holds that price constant, uses the default benchmark throughout and omits any carbon price paid in the country of origin. Declarations based on verified actual values use a different benchmark plus precursor allocation, so check the figure for your own product and route.

This article was corrected on 16 November 2026, as noted at the top. All sources read on 16 November 2026. This article is not legal, tax or financial advice.


What to do before February

  1. Pull your 2026 import volumes by CN code, country of origin and installation.
  2. Look up the default value and benchmark for each line, and calculate certificates per tonne.
  3. Budget the 2027 declaration on default values, and treat verified data as upside.
  4. Request verified emissions data from your largest suppliers now.
  5. Diarise 30 September 2027 and work backwards from it.

You can read who writes Green Insider, and why, on the about page.


Frequently asked questions

Is the 2026 CBAM cost 2.5 percent of my emissions?

Only if your declared emissions equal the product benchmark. Everything above the benchmark is paid at the full certificate price from 2026, and for most default values that is the larger part of the bill.

When do I actually pay?

Certificate sales open on 1 February 2027 for goods imported during 2026, and certificates are surrendered with the annual declaration due on 30 September 2027.

What price will certificates for 2026 imports cost?

They are priced on quarterly averages of EU allowance prices. The second quarter 2026 benchmark was 75.28 euro per tonne, and later quarters will differ.

I import under 50 tonnes a year. Does this apply?

Not while you stay below the threshold, which counts all covered goods per importer per calendar year. Track the running total, because crossing it brings the whole year into scope.

Why was this article corrected?

The earlier version applied 2.5 percent to total embedded emissions rather than to the benchmark, which understated the cost substantially. The calculation and headline were rewritten on 16 November 2026.


Green Insider is independent. No vendor, verifier or consultancy paid for a mention in this article, and none was given advance sight of it.