CLIMATE. CAPITAL. CHANGE.Intelligence for the green economy.
Green Insider

Relying on CBAM default values gets more expensive every year until 2028

CBAM default values carry a mark-up rising from 10 to 30 percent by 2028 while free allocation shrinks. The real cost per tonne, and when verified data pays off.

Relying on CBAM default values gets more expensive every year until 2028

Short answer. Default values are country averages per product, published in Implementing Regulation (EU) 2025/2621, and they carry a mark-up of 10 percent in 2026, 20 percent in 2027 and 30 percent from 2028. At the same time the free allocation deducted from your obligation shrinks. For 100 tonnes of Chinese steel slab, that takes the certificate bill from about 16,200 euro for 2026 imports to about 21,800 euro for 2028.

Checked on 15 November 2026. Sources and unresolved points are in the method note at the end.

Most importers will file their first CBAM declaration on default values, because verified emissions data from a non-EU mill takes months to obtain. That is a reasonable start. It becomes an expensive habit, because the regulation is built to make defaults cost more every year until 2028.

Key takeaways

  • Defaults are country averages. Set per CN code and country of origin.
  • The mark-up rises yearly. 10 percent in 2026, 30 percent from 2028.
  • Fertilisers and electricity differ. Fertilisers carry 1 percent, electricity none.
  • Free allocation shrinks too. Deduction falls from 97.5 to 90 percent by 2028.
  • Verified data removes the mark-up. It needs an accredited verifier and site visit.

What is a CBAM default value?

A default value is the embedded emissions figure you declare when you have no verified data from the installation that made the goods. The Commission published them in Implementing Regulation (EU) 2025/2621 on 31 December 2025, corrected by Implementing Regulation (EU) 2026/1740, published on 31 July 2026 with effect back to 1 January 2026.

Each value is expressed in tonnes of CO2 equivalent per tonne of product, set for a specific CN code and country of origin. It reflects the average emission intensity of that country and sector. Where a country has no row of its own, the value for "other countries and territories" applies.

Two consequences follow. A producer cleaner than its national average is penalised by the default, and you cannot choose a cleaner production route to lower it, because the route is fixed by the country's row.


How much does the mark-up add?

The mark-up is a percentage added on top of the published default, applied to steel, aluminium, cement and hydrogen. It is 10 percent for 2026, 20 percent for 2027 and 30 percent from 2028 onward.

Fertilisers carry a flat 1 percent in every year, and electricity carries none. The Commission has said it intends to review default values and mark-ups, with a target of December 2027, so the schedule after 2028 may still change.

The mark-up is the clearest measure of what missing supplier data costs, because it disappears entirely once you declare verified actual emissions. For Chinese steel slab at the second quarter 2026 CBAM benchmark price of 75.28 euro, the mark-up alone adds about 24 euro per tonne for 2026 imports and about 72 euro per tonne from 2028.


Why does the bill grow even if nothing else changes?

Because two things move against you at once. The mark-up raises the emissions you declare, and the free allocation adjustment that is deducted from them gets smaller each year.

The number of certificates per tonne is declared emissions minus the free allocation adjustment, and never less than zero. That adjustment is the CBAM factor multiplied by the product's benchmark. The factor is 0.975 for 2026, 0.95 for 2027 and 0.90 for 2028, falling to 0.515 by 2030 and zero by 2034.

This is also why the 2.5 percent figure quoted for 2026 is easy to misread. It describes the share of the benchmark that is no longer covered, not the share of your total emissions you pay for. Every tonne of embedded emissions above the benchmark is charged in full from the first year.

If you read our earlier CBAM cost piece, this is the correction to its worked example.

Import year Default with mark-up Free allocation deducted Certificates per tonne Cost per tonne Cost for 100 tonnes Of which mark-up
2026 3.486 (+10%) 1.330 (0.975 x 1.364) 2.156 162 euro 16,230 euro 2,386 euro
2027 3.803 (+20%) 1.296 (0.95 x 1.364) 2.507 189 euro 18,873 euro 4,771 euro
2028 4.120 (+30%) 1.228 (0.90 x 1.364) 2.892 218 euro 21,772 euro 7,157 euro
Chinese steel slab, CN 7207 12 10: published default 3.169 tCO2e per tonne, default benchmark 1.364. All years priced at the Q2 2026 CBAM benchmark of 75.28 euro per tonne to isolate the effect of the rules. Green Insider, November 2026.

Read the last column against the fifth. The carbon price was held flat, yet the bill rises by a third in two years, and roughly a third of the 2028 figure is the mark-up you could have avoided with verified data.

The real price will not stay flat. Certificates for 2026 imports are priced on quarterly averages of EU allowance prices, and the full calculation includes a further deduction for any carbon price paid in the country of origin, which this example leaves out.


What does it take to stop using defaults?

A verified emissions declaration from the installation that produced your goods. That installation must monitor its emissions under Implementing Regulation (EU) 2025/2547, and an independent verifier accredited under Delegated Regulation (EU) 2025/2551 must check the figures under Implementing Regulation (EU) 2025/2546.

The first year of verification requires a physical site visit. For a mill in another continent, that means the producer has to agree, schedule and usually pay for a verifier to travel, which is why requests sent in the spring of 2027 will arrive too late for the first declaration.

Switching to actual values also changes which benchmark is deducted. Verified declarations use the process benchmark plus the free allocation embedded in precursors, rather than the default benchmark, so the saving is not simply the mark-up and needs to be calculated per product.

The commercial mechanics mirror any other supplier data request. As with a sustainability questionnaire, the request that arrives early, in writing, with a clear deadline and a stated reason is the one that gets answered.


When are defaults the sensible choice?

When the volume is small, the producer is unknown or changes often, or verification would cost more than the mark-up it removes. A trader buying a few hundred tonnes a year from several mills may rationally stay on defaults for 2026.

The arithmetic shifts with volume and time. At the 2028 mark-up, the example above carries about 72 euro per tonne of avoidable cost, so 1,000 tonnes from a single mill means roughly 72,000 euro a year, which comfortably pays for a verification visit.

Run that comparison per supplier rather than for your whole import book. One high-volume mill usually justifies the effort long before the long tail does.

Whichever values you use, they end up in the first CBAM declaration.


Method note

Default values and mark-ups are taken from Implementing Regulation (EU) 2025/2621, published 31 December 2025, as corrected by Implementing Regulation (EU) 2026/1740, published 31 July 2026. The default benchmark of 1.364 for blast furnace slab is from Implementing Regulation (EU) 2025/2620.

The certificate formula and CBAM factors follow Regulation (EU) 2023/956 as amended and Article 10a(1a) of Directive 2003/87/EC. Verification requirements follow Implementing Regulations (EU) 2025/2546 and 2025/2547 and Delegated Regulation (EU) 2025/2551. The price of 75.28 euro is the Commission's CBAM benchmark price for the second quarter of 2026.

Three limits apply. The worked example holds the carbon price constant to isolate the effect of the rules and omits any deduction for carbon prices paid in the country of origin. CBAM factors for 2029 onward are stated as scheduled in the ETS Directive, and the mark-up schedule beyond 2028 is subject to the Commission's planned review.

Check the current Annex I value for your exact CN code and country before budgeting, as values differ widely between products.

All sources read on 15 November 2026. This article is not legal, tax or financial advice.


What to do this month

  1. List your 2026 CBAM imports by CN code, country of origin and producing installation.
  2. Look up the default value and default benchmark for each line, and price it for 2026 and 2028.
  3. Rank suppliers by the mark-up cost they carry at 2028 rates.
  4. Send verified data requests to the top suppliers now, in writing, with a deadline.
  5. Ask each one whether an accredited verifier has already visited, and when.
  6. Budget the 2027 declaration on defaults, and treat any verified data as upside.

You can read who writes Green Insider, and why, on the about page.


Frequently asked questions

Where do I find the default value for my product?

In Annex I of Implementing Regulation (EU) 2025/2621, as corrected in July 2026, listed by CN code and country of origin. If your country has no row, use the value for other countries and territories.

Does the mark-up apply to every CBAM product?

No. Steel, aluminium, cement and hydrogen carry 10, 20 and then 30 percent. Fertilisers carry 1 percent in every year, and electricity carries no mark-up.

Is the 2026 CBAM cost only 2.5 percent of my emissions?

Only for goods whose embedded emissions equal the benchmark. Everything above the benchmark is paid in full from 2026, which for most default values is the larger part of the bill.

Can I mix default and actual values?

Yes, per good and per installation. You can declare verified actual values for suppliers who provide them and defaults for the rest within the same annual declaration.

How long does verification take?

Long enough to plan around. The first year needs a physical site visit by an accredited verifier, which the producer has to agree to and schedule, so requests made only after the year ends are usually too late.


Green Insider is independent. No vendor, verifier or consultancy paid for a mention in this article, and none was given advance sight of it.