Short answer. The CBAM de minimis threshold is 50 tonnes of net mass per importer per calendar year, added up across all covered iron and steel, aluminium, cement and fertiliser goods. Electricity and hydrogen never qualify. If your running total crosses 50 tonnes at any point in the year, every tonne imported since 1 January comes into scope, and you must already hold declarant authorisation before the import that takes you over.
Checked on 17 November 2026. Sources and unresolved points are in the method note at the end.
The 50-tonne rule looks like a simple exemption for small importers. It is really a running total with a trap at the end of it, and the trap tends to close in the last weeks of the year, when an extra order is easiest to place and hardest to undo.
Key takeaways
- The threshold is 50 tonnes per year. Counted per importer, across all covered goods.
- Product categories are added together. Steel, aluminium, cement and fertilisers share one total.
- Electricity and hydrogen are always in. No volume exemption applies to them.
- Crossing it covers the whole year. Obligations reach back to 1 January.
- Authorisation must come first. It can take up to 120 days.
What exactly does the threshold measure?
The net mass of covered goods released into free circulation by one importer in one calendar year. The rule sits in Article 2a of the CBAM Regulation, inserted by the CBAM Omnibus, Regulation (EU) 2025/2083, which entered into force on 20 October 2025 and replaced the earlier 150 euro per consignment exemption.
Net mass means the mass of the goods themselves, excluding packaging, as recorded on the customs declaration. For steel products it is the mass of the finished goods, not of the ore or scrap that went into them.
The count is per legal entity, identified by its EORI number. Two related companies that import separately each have their own threshold, but splitting imports between entities mainly to stay under the limit is treated as circumvention and disregarded.
What counts toward the 50 tonnes, and what does not?
Only covered goods that actually enter the EU market. Goods sitting in a customs warehouse, re-exported or in transit are left out until and unless they are released into free circulation.
| Situation | Counts toward 50 tonnes? | Note |
|---|---|---|
| Iron and steel, aluminium, cement, fertilisers released for free circulation | Yes | All categories added into one total |
| Electricity | No, always fully covered | No de minimis exemption at any volume |
| Hydrogen | No, always fully covered | No de minimis exemption at any volume |
| Goods placed in a customs warehouse | Not until released | Counted in the year of release |
| Re-exports and transit | No | Never enter free circulation |
| Goods from Iceland, Liechtenstein, Norway or Switzerland | No | Origins listed as exempt in Annex III |
| Packaging | No | Net mass only |
The first row is the one importers misread. A company buying 30 tonnes of steel profiles and 25 tonnes of cement clinker is not under the threshold twice; it is over it once, at 55 tonnes, with a first CBAM bill to follow.
What happens if you cross it in December?
The whole year comes into scope. Once the running total exceeds 50 tonnes, CBAM obligations apply to all covered imports of that calendar year from 1 January, not only to the tonnes above the line, and there is no retroactive exemption.
The year below shows how that plays out for an importer that never thought of itself as a CBAM company.
| Month | Import | Net mass | Running total | Status |
|---|---|---|---|---|
| January | Steel angles and sections | 12 t | 12 t | Below threshold |
| March | Aluminium bars | 8 t | 20 t | Below threshold |
| May | Nitrogen fertiliser | 10 t | 30 t | Below threshold |
| July | Steel sheet into customs warehouse | 15 t | 30 t | Not counted while warehoused |
| September | 8 t of that sheet released | 8 t | 38 t | Below threshold |
| October | Steel screws and bolts | 5 t | 43 t | Internal alert passed |
| December | Cement | 9 t | 52 t | Over: all 52 t covered |
Read the last row carefully. The December cement order did not add 2 tonnes to the obligation; it added all 52 tonnes, including the January steel that nobody calculated emissions for at the time.
Those 52 tonnes then need a declaration, embedded emissions data or default values, and certificates for the full year.
When must you apply for authorisation?
Before the import that takes you over, not after. An importer must already be an authorised CBAM declarant when it releases the tonne that crosses the threshold, and processing an application can take up to 120 calendar days.
Importers that expected to exceed the threshold from the start of the definitive period had until 31 March 2026 to apply and keep importing while their application was assessed. Those who started below 50 tonnes and later approach it must apply as soon as they foresee crossing it.
In practice, that means an internal alert well below 50 tonnes. An alert at 40 tonnes, or 80 percent of the limit, gives time to apply or to defer an order to January.
What does crossing it without authorisation cost?
A penalty of three to five times the standard CBAM penalty, applied to the embedded emissions of all that year's imports, as reported in current compliance guidance on Article 26(2a). Before inflation indexation that has been put at 300 to 500 euro per tonne of embedded emissions.
The competent authority may reduce the penalty where the threshold was exceeded by no more than 10 percent, though not below the standard level. That reduction is discretionary, so it is not something to plan around.
Compare that with the certificate cost itself. Even on CBAM default values the certificate bill is a fraction of the penalty, which makes authorisation the cheap option whenever crossing is possible.
If your broker handles CBAM for you, check who holds the status in our guide to CBAM declarant liability.
Method note
The threshold, its scope and the treatment of electricity, hydrogen and exempt origins follow Article 2a of Regulation (EU) 2023/956 as inserted by Regulation (EU) 2025/2083, in force from 20 October 2025. The 120-day processing period refers to Implementing Regulation (EU) 2025/486, and the 31 March 2026 application date reflects guidance for the start of the definitive period.
The penalty multiple, the 10 percent reduction and the per-tonne range are taken from compliance guidance published in July 2026 summarising Article 26 as amended; penalties are applied by national authorities and indexed for inflation. The monthly table is illustrative, and product descriptions are simplified, so confirm the CN classification of each of your goods against Annex I.
All sources read on 17 November 2026. This article is not legal, tax or financial advice.
What to do this week
- Pull every 2026 customs entry for covered goods and add up net mass across all categories.
- Separate warehoused, re-exported and exempt-origin goods from the total.
- Set an internal alert at 40 tonnes for 2027 in whatever system books imports.
- If you are above or near 50 tonnes and not authorised, apply now or defer orders.
- Check whether electricity or hydrogen imports already put you in scope regardless of tonnage.
You can read who writes Green Insider, and why, on the about page.
Frequently asked questions
Is the 50 tonnes per product or per importer?
Per importer, per calendar year, across all covered iron and steel, aluminium, cement and fertiliser goods added together.
If I cross 50 tonnes in December, do earlier imports count?
Yes. Once the threshold is exceeded, obligations apply to all covered imports of that calendar year from 1 January.
Does electricity count toward the threshold?
No. Electricity and hydrogen have no de minimis exemption, so any volume is covered regardless of how much else you import.
Can I split imports between two of my companies?
Separate legal importers each have their own threshold, but arrangements set up mainly to stay below it are treated as circumvention and disregarded.
Do goods in a customs warehouse count?
Only once they are released into free circulation, and then in the year of release.
Green Insider is independent. No vendor, verifier or consultancy paid for a mention in this article, and none was given advance sight of it.




