Short answer. Ask each non-EU producer for its operator's emissions report, the template the Commission makes mandatory for communicating embedded emissions, covering calendar year 2026 and verified by a verifier accredited in the EU. Name the installation, the CN codes and the volumes you bought, ask for any carbon price paid, and send the request now. Data for 2026 can only be finalised after the year closes, and the first declaration is due 30 September 2027.
Checked on 16 November 2026. Sources and unresolved points are in the method note at the end.
Most CBAM data requests fail for a simple reason. The importer asks a sales contact for "your CO2 figures", gets a sustainability brochure back, and discovers in the summer that none of it can be used in a declaration.
Key takeaways
- Ask for the operator's emissions report. Its template is mandatory, not optional.
- Only verified data replaces defaults. The verifier must be EU-accredited.
- Data follows the calendar year. 2026 figures are final only after December.
- Carbon price paid needs certification. Ask for it separately and early.
- The CBAM Registry can carry it. Operator registration there is voluntary.
What exactly should you ask for?
The operator's emissions report, not a carbon footprint. The Commission's methodology rules make a specific template mandatory for communicating embedded emissions from an installation to an EU declarant, and that document is what your declaration needs.
Its central figure is the specific embedded emissions per tonne of each CBAM good, direct and, where the regulation requires them for that good, indirect. The Commission's own guidance for non-EU operators calls this the main parameter the importer is interested in.
Around that figure sit the details that make it usable. Without them, even a correct number can fall back to a default value, which is the expensive outcome described in our piece on CBAM default values.
| What to request | Why the declaration needs it | Who produces it | If it is missing |
|---|---|---|---|
| Installation name, address and identifier | Ties the data to the plant that made your goods | Operator | Data cannot be matched to your imports |
| Production route | Determines the benchmark used in the free allocation adjustment | Operator | Calculation cannot be completed |
| Specific direct embedded emissions per tonne, by CN code | The core figure you declare | Operator, from its monitoring plan | Default value with mark-up applies |
| Specific indirect embedded emissions, where required for the good | Required for some goods, not all | Operator | Default value applies for that element |
| Good-specific parameters, such as clinker content or nitrogen forms | Listed for each sector in the methodology rules | Operator | Declaration incomplete |
| Precursor data: source installation, emissions, route | Embedded emissions include those of precursors | Operator, with its own suppliers | Precursor share falls back to defaults |
| Carbon price effectively paid, per tonne | Can reduce the certificates you surrender | Operator, with independent certification | No reduction claimed |
| Verification report from an EU-accredited verifier | Only verified actual data can replace defaults | Verifier, paid for under arrangements you agree | Data cannot be used as actual values |
Read the right-hand column as your risk register. Every gap has a cost, and most of them end in the same place: a default value plus a mark-up that rises to 30 percent from 2028.
When should you send the request?
Now, even though the final 2026 figures cannot exist yet. The reporting period for embedded emissions is the calendar year in which the goods were produced, so 2026 data is calculated after 31 December and then verified.
The constraint is verification capacity. The first CBAM verifiers were expected to receive accreditation around September 2026, registration of verifiers in the CBAM registry opened on 1 September 2026, and every importer in the EU is now competing for the same small pool for the same window.
A producer who hears from you in November can book a verifier for early 2027. One who hears from you in May may not get a slot before the declaration is due on 30 September 2027.
Who pays for verification?
Nothing in the CBAM rules settles who pays the verifier between you and your supplier. The operator engages the verifier because the verification covers its installation, but the cost is a commercial matter.
Expect three common outcomes: large producers with many EU customers absorb the cost to keep the market, smaller producers pass it through in price, and some ask each importer to contribute. That last case is where your volume gives you leverage.
Raise it in the first message rather than after the producer has agreed in principle. Like any supplier data request, the clearer the ask and its consequences, the faster the answer.
Should your supplier use the CBAM Registry?
It is worth asking for. Operators can register their installations in the CBAM Registry, where verified emissions data is uploaded once per installation and then shared with every declarant that imports from it.
Registration is currently voluntary. For a producer with dozens of EU customers it saves answering the same request repeatedly, and declarants see a summary of the emissions report rather than the full document, which addresses the confidentiality concern many producers raise first.
The Commission has said the registry will be extended in 2027 so operators can also share data with downstream producers who use their goods as precursors.
What should the email actually say?
Short, specific and tied to a decision. Adapt this to your own relationship and send it to someone with authority over production or compliance, not only to your sales contact.
Subject: CBAM: verified embedded emissions data for 2026 deliveries
Dear [name],
Under the EU Carbon Border Adjustment Mechanism we must declare the embedded emissions of the goods we imported from you in 2026. Without verified installation data we are required to use EU default values with a mark-up, which will make these goods more expensive for us from 2027 onward.
Could you please provide, for calendar year 2026, the operator's emissions report in the Commission's template for [installation name and address], covering CN codes [codes] and approximately [tonnes] delivered to us, verified by a verifier accredited in the EU? Please also include any carbon price effectively paid, with its certification.
If your installation is registered in the CBAM Registry, sharing the verified report there would work well for us. We would like to understand your verification timeline and how you plan to cover its cost, and we would appreciate a reply by [date].
Kind regards,
[name, company, role]
The second sentence carries the weight. Producers respond to the commercial consequence, not to the regulation, so state plainly what happens to your purchasing if the data never arrives.
If your customs broker acts for you, agree early who collects this data; our guide to CBAM declarant liability sets out the options.
Method note
The mandatory operator's emissions report template, the definition of the reporting period, the role of precursor data, carbon price certification and the CBAM Registry for operators are taken from the European Commission's guidance document for non-EU operators, one of ten guidance documents published on 14 August 2026, which refers to Article 10 of the methodology rules in Implementing Regulation (EU) 2025/2547.
Verifier registration and accreditation timing, certificate sales from 1 February 2027 and the 30 September 2027 declaration deadline reflect reporting on the definitive period published during 2026. The Commission's guidance is explicitly non-binding, and the texts in the Official Journal prevail.
Two points remain open. The guidance does not prescribe who pays for verification, so the outcomes described are commercial practice rather than rules. Sector guidance specifies which goods require indirect emissions and which parameters apply, so check the document for your sector before sending the request.
All sources read on 16 November 2026. This article is not legal or financial advice.
What to do this week
- List every non-EU installation that produced goods you imported in 2026, with CN codes and tonnes.
- Rank them by volume and by how far their default value sits above the benchmark.
- Send the request to your top suppliers, addressed to production or compliance as well as sales.
- Ask each one whether it is registered in the CBAM Registry and has a verifier booked.
- Agree in writing who pays for verification before the work starts.
You can read who writes Green Insider, and why, on the about page.
Frequently asked questions
Can my supplier just send me a product carbon footprint?
Not as a replacement. CBAM requires the operator's emissions report in the Commission's template, verified by an EU-accredited verifier, before the data can be used instead of default values.
Why ask now if 2026 is not over?
Because verification capacity is limited and the data can only be finalised after the year closes. Early requests let producers book a verifier before the queue builds ahead of the 30 September 2027 deadline.
Does the supplier file anything with the EU itself?
No. The importer or declarant files the CBAM declaration. The producer supplies the data, either directly to each customer or through the CBAM Registry.
What if the supplier refuses?
You declare on default values with the applicable mark-up. Price that cost into your next negotiation or sourcing decision, since it rises each year to 2028.
Is registration in the CBAM Registry mandatory for producers?
Not at present. The Commission recommends it, and it lets a producer upload verified data once and share it with every declarant that buys from the installation.
Green Insider is independent. No vendor, verifier or consultancy paid for a mention in this article, and none was given advance sight of it.




